Signal merger is used for combining different signals to one input. Mostly used for combining of the limit switches signal to one input, our signals from measurement probes.
Input channels can be configured to any combination of NPN/PNP and NO/NC input type.
Dimensions
Main features
| Power supply | 5-24VDC |
| Power consumption | <25mA |
| Input current | 1.6mA @ Vcc=5V 4.5mA @ Vcc=12V 9.5mA @ Vcc=24V |
| Input polarity | NPN or PNP (switchable) |
| Input phase | Normal (NO) or Inverted (NC) |
| Merging function | IN1 or IN2 or IN3 or IN4 |
| Output type | Potential – free |
| Output voltage | 24V max. |
| Output current | 20mA max. |
| Output phase | Normal (NO) or Inverted (NC) |
| Transitional ON time | <20us |
| Transitional OFF time | <500us |
| PCB dimension | 42x60mm |
| Enclosure dimension | 48x66mm |
Example of wiring
Downloads
Download the datasheet and see all the details about the product.
Add this product to the cart
Set can be configured from:
3D probe:
DIG3D.LP.M - low profile 3axis CNC digitizer with magnetic connector, sealed. Storage box included.
Hand operated TLS:
DIG-Z.M - precise Z-axis TLS with magnetic connector. Storage box included.
Worktable fixed TLS (please select):
DIG-Z.Fix - precise Z-axis TLS.
DIG3D.Fix - 3D tool length & diameter sensor.
Signal merger (optional):
SMART.MER/2 - signal merger with probe guard function
SIG.MER/4 - signal merger 4 channels
SIG.MER/2 - signal merger 2 channels
SMART.GUARD - probe guard module
Cable:
1x cable with the magnetic connector
Probe & sensors power supply: 5-24V DC
Interface:
- NPN, PNP: 3 wires (+V, GND, Output)
List of available tips for DIG3D probes
