This device is mostly used for an automated measurement of tool length in CNC machines.
The sensor has sensitive optical switch, triggered by pressing a sensor surface.
Product video
Dimensions
Main parameters
| Power supply | 5-24V |
| Switch type | NC – normally closed = output is active, when sensor is NOT triggered. — or — NO – normally openned = output active, when sensor is triggered. |
| Output type | NPN – switch to GND — or — PNP – switch to power supply |
| Cable length | 2m |
Wiring
| Wire color | Signal |
|---|---|
| Brown | positive power supply |
| Black | Output |
| Blue | GND |
Downloads
Add this product to the cart
DIG3D.SEAL (3pcs)
Product Details
Značka: topcom.cz
Spare silicon seal for DIG3D sensors (3pcs)
Suitable for DIG3D.Fix or DIG3D probe
Hole diameter 1.5mm: used in DIG3D probe with standard tips, fixed ruby ball tip
Hole diameter 3mm: used in DIG3D.Fix and probe with M2.5 extender
*color may vary (blue/gray, black) If you want concrete color, please specify in the order comment
