This device is mostly used for a surface digitizing, or as an edge finder and geometry measurement by CNC machines.
Two interface types are available:
Both versions have identical mechanical part, share tips and spare parts. The difference is in the internal electronic circuit. DIG3D.LP.M.SW version has only mechanical switch. This version is available only in NC switch type configuration. DIG3D.LP.M version has internal signal filter (schmitt flip-flop circuit), dual color LED indicator and offers all output/switch combinations NO/NC, NPN/PNP.
Watch the product video
DIG3D.LP.M connection
| Power supply | 5-24V |
| Switch type | NC – normally closed = output is active, when sensor is NOT triggered. — or — NO – normally openned = output active, when sensor is triggered. |
| Output type | NPN – switch to GND — or — PNP – switch to power supply |
| Cable length | 1m, 2m or 4m, (3 terminals) |
DIG3D.LP.M wiring
| Wire color | Signal |
|---|---|
| Brown | VCC (positive power supply) |
| Black | Output |
| Blue | GND |
DIG3D.LP.M.SW connection
| Switch type | NC – normally closed = output is active, when sensor is NOT triggered. |
| Output type | potential free switch |
| Cable length | 1m, 2m or 4m, (2 terminals) |
DIG3D.LP.M.SW wiring
| Wire color | Signal |
|---|---|
| Black | NC (normally closed) |
| Blue | CM (common) |
Standard accessories and spare parts
Downloads
Storage boxes and holders
Add this product to the cart
PCB.DIG3D.v2.5
Product Details
Spare PCB for DIG3D and DIG3D.LP.M. Please select correct output version.
PCB v 2.5 is compatible with the previous versions v2.3 and v2.4
