This device is mostly used for an automated measurement of tool length in CNC machines.
The sensor has sensitive optical switch, triggered by pressing a sensor surface.
Product video
Dimensions
Main parameters
| Power supply | 5-24V |
| Switch type | NC – normally closed = output is active, when sensor is NOT triggered. — or — NO – normally openned = output active, when sensor is triggered. |
| Output type | NPN – switch to GND — or — PNP – switch to power supply |
| Cable length | 2m |
Wiring
| Wire color | Signal |
|---|---|
| Brown | positive power supply |
| Black | Output |
| Blue | GND |
