DIG3D.LP.M – 3axis low profile touch probe with magnetic connector

This device is mostly used for a surface digitizing, or as an edge finder and geometry measurement by CNC machines.

Two interface types are available:

**DIG3D.LP.M** – **3wire interface** (GND, power, output)

**DIG3D.LP.M.SW** – **2wire interface** (switch only)

Both versions have identical mechanical part, share tips and spare parts. The difference is in the internal electronic circuit. DIG3D.LP.M.SW version has only mechanical switch. This version is available only in NC switch type configuration. DIG3D.LP.M version has internal signal filter (schmitt flip-flop circuit), dual color LED indicator and offers all output/switch combinations NO/NC, NPN/PNP.

Watch the product video

product video

DIG3D.LP.M connection

Power supply	5-24V
Switch type	NC – normally closed = output is active, when sensor is NOT triggered. — or — NO – normally openned = output active, when sensor is triggered.
Output type	NPN – switch to GND — or — PNP – switch to power supply
Cable length	1m, 2m or 4m, (3 terminals)

DIG3D.LP.M wiring

Wire color	Signal
Brown	VCC (positive power supply)
Black	Output
Blue	GND

DIG3D.LP.M.SW connection

Switch type	NC – normally closed = output is active, when sensor is NOT triggered.
Output type	potential free switch
Cable length	1m, 2m or 4m, (2 terminals)